|Network Equipment||Banking Institution||Hospitality|
|Data Centers||Domestic Use||Communication Systems|
|Server Rooms||Industrial Environment||Workstation|
It is 1-Phase In/ 1Phase Out high-density UPS system, of which input current is kept in balance. No unbalance problem might occur. And also support for three phase input.
This series UPS is controlled by Digital Signal Processor(DSP); ehance, it increases reliability, performance, self-proteciton, self-diagnostics and so on.
The battery voltage of this series UPS can be configured at2pcs, 9pcs, 16pcs or 20pcs according to your convenience.
The series UPS adopts advanced three-stage charging method:
With LCD plus LED displays, the user may easily get UPS status and its operational parameters, such as input/output voltage, frequency & load%, battery % and ambient temperature, etc..
Via optional SNMP Card, you may remotely control and monitor the UPS.
This UPS series is a kind of single phase in single phase out high frequency online UPS, it provides four (4) capacities: The 1 KVA, the 3 KVA, the 6 KVA and 10 KVA. These equipments are modularized and adopt the N+1 redundancy. It can flexibly increase the number of the UPS modules according to the load capacity which is convenient for flexible allocation and gradually investment.
The UPS can solve most of the power supply problems, such as blackout, over-voltage, under-voltage, voltage sudden drop, oscillating of decreasing extent, high voltage pulse, voltage fluctuation, surge, inrush current, harmonic distortion (THD), noise interference, frequency fluctuation, etc..
This UPS can be applied to different applications from computer device, automatic equipment, communication system to industry equipment.
Standards (Surge Suppressions): EN 61000-2-2/ EN 61000-4-2, Level 4/ EN 61000-4-3, Level 3/ EN 61000-4-4, Level 4 (also on signal ports)/ EN 6100-4-5, Level 4 Criteria A
Standards (EMC Certification): CE per IEC/EN 62040-2/ Class B
Standards (EMC Emissions): IEC 62040-2:ed2:2005 / EN 62040-2:2006
Safety conformance: IEC 62040-1-1, IEC 60950-1
Agency marking: CE
|DESCRIPTION||MISTRAL 1 KVA||MISTRAL 2 KVA||MISTRAL 3 KVA||MISTRAL 6 KVA||MISTRAL 10 KVA|
|Input voltage||220/ 230/ 240 Vac ( P+N+T) ±20%|
|Operating input voltage||120 – 276 Vac|
|Operating frequency range||45 – 55 Hz/ 54 – 66 Hz ± 0.5 Hz|
|Input power factor||≥ 0.98||≥ 0.99|
|Bypass voltage range||Max voltage.: +15% (optional +15%, +10%, +25%) Min voltage.: -45% (optional -15%, -20%, -30%) Protected frequency range: ±10%||220V ± 25% (optional +10%, +15%, +20% ) 230: +20% (optional +10%, +15%) 240: +15% (optional +10%) Min voltage: -45% (optional -20%, -30%)|
|Bypass frequency range||± 10%|
|Total Harmonic Distortion (THD)||≤ 3% (Linear mode) ≤5% (Non linear mode)||≤ 3% (100% Linear mode)|
|Output voltage||220/ 230/ 240 Vac (Adjustable)|
|Frequency (Online mode)||50 or 60Hz||±1%/ ±2%/ ±4%/ ±5%/ ±10% Rated frequency (optional)|
|Frequency (Battery mode)||≤5% (Non linear mode)||50/ 60 (±0.1) Hz|
|Total Harmonic Distortion (THD)||≤ 2% (Linear mode)/ ≤ 5% (Non linear mode)|
|Wave form||Pure Sinewave|
|Battery voltage||Optional voltage (±96/ ±108/ 120 VDC)|
|Typical recharge time||6-8 hours ( 90% of full capacity)|
|Backup time||Long run unit depends on the capacity of external batteries. Estimated remaining time displayed on front LCD|
|Charge current||Max current: 10A, charge current can be set according to battery capacity installed|
|Transfer time||Utility to battery: 0ms – Utility to bypass: 0ms|
|Overload (Linear mode)||Load (≤110% last 60min/ ≤125% last 10min/ ≤150% last 1sec/ >150% turn back to bypass mode|
|Overload (Battery mode)||10A input breaker||15A input breaker||20A input breaker||40A input breaker||60A input breaker|
|Short circuit||Hold whole system|
|Overheat||Line mode: switch to bypass – Backup mode: switch down the UPS immediately|
|Low battery voltage||Alarm and switch OFF|
|Self diagnostic||Upon power ON and software control|
|Battery||Advanced (smart) battery management|
|Noise suppression||Complies with EN62040-2|
|Audible & visual alarms||Line failure, battery low, Overload, system fault|
|Status Led & LCD display||Line mode, backup mode, ECO mode, Bypass mode, Battery low, Battery bad, Overload & UPS fault|
|Reading on the LCD display||Input voltage, Input frequency, Output voltage, Output frequency, Load percentage,Battery voltage, Inner temperature & Remaining battery back-up time|
|Communication interface||USB, RS232, Parallel port, SNMP card, Relay card (optional)|
|Operating temperature||0 - 4 0 °C|
|Storage temperature||-25 °C – 55 °C|
|Humidity range||0 – 95% (non condensing)|
|Dimensions (l x h x p) mm||440x86.5x430||440x86.5x696||443 x 131 x 580 (3U)|
|Security||IEC/ EN62040 – 1 IEC/ EN60950 – 1|