AVR Trio AVR

from 30 to 2000 KVA

Our voltage regulators in the "Trio" range use technology similar to that of our "Ultimate" range, namely a tubular winding.

The peculiarity of these comes from the fact that the regulation is done independently according to the phases.

Indeed a Regulator "Trio" allows to enhance the current of a phase while it lowers the current on the other two. Location very far from the main electrical network whose phases are unbalanced,

Lightning-sensitive area, Industrial environment where neighboring machines do not consume the same quotas on different phases

Specifications

Use cases

  • Industrial machinery

  • Building Trade

  • Medical equipment

  • Ascensceurs

  • Emergency systems

Default title

None

Default title

None

Default title

None

Default title

None

Default title

None

Default title

None

Views

Products

PASIP0501 - AVR Trio 30KVA TT


PASIP0502 - AVR Trio 50KVA TT


PASIP0507 - AVR Trio 60KVA TT

1 pcs / carton
500.00 kg
118.0 x 139.0 x 88.0 cm cm

PASIP0503 - AVR Trio 80KVA TT

1 pcs / carton
480.00 kg
1.88 cbm

PASIP0504 - AVR Trio 200KVA TT


PASIP0505 - AVR Trio 300KVA TT

  • Phase No(Three phase four system, Split-Phase Regulating or Each Phase controlling independently) :
  • Input rated voltage(220V+/-20%(176~264VAC), wire voltage 380V+/- 20%(304~356VAC) or 220V+/-30%(154~286VAC), wire voltage 380V+/-30%(266~494VAC) : Vac
  • Voltage accuracy : +/-2-5%(adjustable)
  • Frequency : 50 - 60 Hz
  • Efficiency : >95 %
  • Response time(against 10% input voltage deviation) : <1.5 S
  • Ambient Temperature : -10 - +40 ºC
  • Insulation resistance : >2 MΩ
  • Waveform distortion : Non additional waveform distortion
  • Protection(Over voltage, over current, phase failure, phase sequence, machine fault indication etc. Protection function) :
  • Over-load capacity(1min) : At the rated current of 2times
  • Electricity-resistance strength(Power frequency sinusoidal is 2000VAC without breakdown and flash over when it lasts 1min) :

PASIP0506 - AVR Trio 300KVA TT


PASIP0509 - Automatic Voltage Regulator IPower Trio 1400 KVA

  • Type 1(CONSTRUCTION:) :
  • -(High Tension-Automatic Voltage Regulators, there are helical coils mounted on a conventional laminated core) :
  • -(Carbon rollers goes around the length of the coil track) :
  • -(The rollers are connected to the electric output terminals) :
  • -(Parallel connection of compensating winding near the regulating coil is done) :
  • -(Connection between the windings and regulating coils is short circuited so as to reduce the effect of core-flux fringing) :
  • -(It keeps the reactance of the regulator constant at any position of the rolling contact) :
  • Type 2(TECHNICAL SPECIFICATIONS) :
  • -(Solid state relay can sense variations: ± 1% of the rated output voltage) :
  • -(Output Accuracy: +/- 1%) :
  • -(Efficiency: above 98%) :
  • -(Air/ Oil) : Cooling
  • Type 3(ADVANTAGES) :
  • -(Low maintenance and replacement cost) :
  • -(5% to 10% saving on energy consumption) :
  • -(Reduction in breakdown period of the machines) :
  • -(100% capacity) :
  • -(On Load step-less voltage variation) :
  • -(Over load capacity as per IS 6600) :
  • -(Size: 225x300x660 cm (DxWxH)) :
  • -(Overall Weight: 4300Kg) :
  • -(Noncontractual Photographs) :

Specifications

AVR Trio

 

Power

15Kva, 20Kva, 30Kva, 40Kva, 60Kva, 75Kva, 100Kva, 150Kva 500Kva and 600Kva

Input

Type of system

Système à 5 fils

Phase voltage

160V - 250V

Output

Three-phase 5-wire system

Phase voltage

220V

Voltage of the line

380V

Protection

Phase voltage

246 +/-4V (Voltage of the reference phase)

Overload Capacity

 

60 minutes for 20%, 32 minutes for 40%, 5 minutes for 60%

Efficiency

 

≤ + /- 40%

Frequency

 

50 -60 Hz

Distortion

Pas de distortion supplémentaire

Power factor

>0.95

Efficiency

>90%

Adjustment time

<1s (lorsque la tension d’entrée présente un changement de 10%)

Temperature

- 5 °C /+ 40 °C

Speed ​​of regulation

>10V /S

Insulation resistance

≥2MΩ