IP Compact UPS

Check the new version
Mistral Series
Check the previous versions
IP Secure


  • Transport icon
  • SOHO icon
  • E-Medical icon
  • Industry icon
  • Emergency icon

Ideal for:

  1. Networking environments
  2. Data-Centers
  3. Server rooms and work stations
  4. Automation
  5. Banking institutions
  6. Domestic usage
  7. Industrial environments
  8. Textile
  9. Hotellery
  10. Communication systems

This Online Series is a Uninterruptible Power Supply (UPS) incorporating double-conversion technology. It provides perfect protection specifically for computer equipment, Communication Systems to computerized instruments. Its true online double-conversion design eliminates all mains power disturbances.

A rectifier converts the alternating current from the utility power to direct current. This direct current charges the batteries and powers the inverter. On the basis of this DC voltage, the inverter generates a pure sinusoidal AC voltage, which is constantly powering the loads. Computers and Peripherals are thus powered entirely by the UPS. In the event of power failure, the maintenance-free batteries power the inverter.

All IPOWER of the IP COMPACT series are designed to adap an isolating transformer for better and higher level of protection, both "IN" and "OUT".




With the help of its Compact design the IP COMPACT series of IPOWER provides a high level of protection with less batteries to reduce its installation area and installation fee. Thanks to its High Frequency Online Double Conversion technology, the IP Compact features:

  1. High Frequency Online Double Conversion technology
  2. Fully computerized technology
  3. Power factor of 0.9
  4. Wide input voltage range
  5. Variable continuous voltage
  6. Smart RS232/ SNMP card (optional) RS485/ Relay card (optional)
  7. Increase & decrease voltage to protect from overloads and peaks
  8. Cold start
  9. 1050J protected against surge and lightning


Capacity 5400(W) 9000(W) 9000(W) 13500(W) 18000(W)
Input voltage 3/1phase, 3wires+N+G
Power factor until 10kva ≥0.99 - 15 and 20 kva ≥0.96
Voltage 220VAC/ 380VAC
Frequency 50/60HZ ± 8 % Auto detect)
Max Current 45A 59A 89A
Bypass voltage range L-N:176 Vac ± 3% @ 100% charge;130 Vac ± 3% @ 50% charge
L-N:188 Vac ± 3% @ 100% charge,142 Vac ± 3% @ 50% charge
Built-in 20 kA lightning and surge protector (Over & under voltage protection/ voltage peaks/ fluctuations & Automatic voltage regulator)
Voltage 220/230/240Vac+/-1%(Static)
Frequency 46~54Hz to 50Hz/56~64Hz to 60Hz(Linear mode) 46~54Hz or 56~64Hz (Linear mode)
50/60Hz ±0.02Hz (Battery mode) 50/60Hz ± 0.1Hz (Battery mode)
Power factor 0.9
Crest factor 3:1 Max
Dynamic instant distortion <5% (50% - 100% - 50% linear load )
Total Harmonic Distortion <2% (linear load),non-linear load <4%
Overload (Linear mode) 105%-125%(30S to bypass),125%-150%(10S to bypass),150% (0S bypass fault)
Overload (Battery mode) 105%-125%(30Sshut down),125-150%(10S shut down),150%(inverter failure alarm)
Efficiency >85%
Transfer time 0ms (line to battery)
0ms (Inverter to bypass)
0ms (Bypass to inverter)
LCD display Charge/ Battery/ Input/ Output/ Status of operating mode/ UPS overall status/ Charge level/ Charge level (W)/ Charge level (VA)/ Battery status/ Input & output current (A)/ Temperature/ Alarms/ Error codes & Events
Battery mode Beep every 4 seconds (with mute feature)
Low battery Beep every seconds
Overload Two (2) beeps every seconds Beep every seconds
Error Beep continuously
Smart RS-232/USB Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and MAC
Optional SNMP/AS400/USB
Supported humidity 0-90 % RH (non condensing) @ 0- 40°C
Noise level ≤45dB   ≤50dB
Dimensions & Weight
Weight (Kg) 86 93 N/A
Dimensions (D X W X H) 582×260×572 600×300×660